All Flow-Guard® Filtration

Series 1100 Basket Strainers

Series 1100 Basket Strainers

Basket strainers capture sand and other material, preventing downstream problems. This body style accommodates a variety of connection types. Easy access to strainer allows quick, in-line access.

Resources
Name Size
Technical Data Sheets 718.4 KB

Series 1100 Line Strainers

Series 1100 Line Strainers

Simple in-line strainers capture sand and other material, preventing potential downstream problems. Recommended as secondary or backup filtration only. Commonly used as an added protection on Media Filter Systems.

Resources
Name Size
Technical Data Sheets 718.4 KB

Series 1100 Stainless Steel Media Filters

Series 1100 Stainless Steel Media Filters

Flow-Guard Media Filters provide superior filtration in any irrigation application. Utilizing three-dimensional filtration through media bed with a large surface area has proven to be the most effective and reliable way to remove both organic and inorganic contaminant loads from irrigation source water. The combination of stainless steel construction and flow balanced under drain, create an extremely efficient and durable filter suitable for even the most difficult applications. Lightweight, easy to install and less expensive to ship than conventional models.

Learn More
Resources
Name Size
Technical Data Sheets 1.7 MB
Installation Instructions 2.1 MB
Installation Instructions (es) 2.1 MB

Series 1200 SSC Backflush Recycle System

Series 1200 SSC Backflush Recycle System

The Flow-Guard Backflush Recycle System is designed to eliminate the wasteful and problematic issue of backflush water disposal. This system captures backflush water, filters it, and returns it to the inlet of your media tank system. Standard unit comes assembled, complete with 15hp Booster Pump (350 gpm at 65 psi) ready for easy installation.

Also available with 20 hp high pressure or high flow pump.

Resources
Name Size
Technical Data Sheets 814.7 KB

Series 1200 SSC Gravity Screen Filter

Series 1200 SSC Gravity Screen Filter

The SSC Gravity Screen Filter is designed for use on gravity flow water systems and can be used as either a pre-filter or the primary filter to remove large volumes of debris without wasting valuable backwash water. The SSC Filter is effective in low volume irrigation as well as various industrial applications.

Resources
Name Size
Technical Data Sheets 2.8 MB

Series 1300 Stainless Steel SPS Filters

Series 1300 Stainless Steel SPS Filters

The Series 1300 Pressurized Screen Filters deliver excellent filtration of inorganic contaminates found in irrigation water. Two models provide flow ranges from 100 to 3200 GPM, and filtration grades from 40 to 200 mesh. All filters are manufactured from durable 304 stainless steel. The SPS line of pressurized screen filters are ideal for setups where the inlet and outlet pipes are parallel or perpendicular to each other.

Resources
Name Size
Technical Data Sheets 1.7 MB

Series 1300 Stainless Steel SYS Filters

Series 1300 Stainless Steel SYS Filters

The Series 1300 Pressurized Screen Filters deliver excellent filtration of inorganic contaminates found in irrigation water. Two models provide flow ranges from 100 to 3200 GPM, and filtration grades from 40 to 200 mesh. All filters are manufactured from durable 304 stainless steel. The SYS line of pressurized screen filters are ideal for setups where a filter needs to be placed in-line in an existing installation.

Resources
Name Size
Technical Data Sheets 1.7 MB

Series 1500 Galvanized Screen Filters

Series 1500 Galvanized Screen Filters

The Series 1500 Pressurized Screen Filters deliver excellent filtration of inorganic contaminates found in irrigation water. Two models provide flow ranges of 1200 or 1750 GPM, and filtration screen options 1/16", 3/32", or 1/8". Available with Victaulic, Flanged, Plain End, or Ringlock ends. These versatile filters can be used as pre-filters or primary filters, depending on application and water quality.

Resources
Name Size
Technical Data Sheets 4.7 MB

Series 1600 Sand Separator

Series 1600 Sand Separator

The Series 1600 Sand Separator is used to remove sand and other fine solids from water. Sand Separators work by using centrifugal force. The centrifugal force separates the sand from the water. The clean water is forced into the center of the separator and up through an outlet. The sand that is removed from the water is then collected in a collection chamber at the bottom of the separator. This chamber can be manually emptied as needed.

Resources
Name Size
Technical Data Sheets 1.1 MB