Universal Fittings

45° Elbow

45° Elbow

Latch Type 45° Elbow allows a 45° change in direction from main supply line. Roundback gasket included.

90° Elbow

90° Elbow

Latch Type 90° Elbow allows a 90° change in direction from main supply line. Roundback gasket included.

Assembled Bands

Assembled Bands

Bolts to aluminum pipe to form a latch type connection.

Butterfly Line Valve

Butterfly Line Valve

Latch type valve used to open or close water flow in a piping system. Includes roundback gasket.

Discharge Adapter

Discharge Adapter

Pump Discharge Adapter with roundback gasket.

End Tee

End Tee

Latch Type End Tee installs at end of main supply pipe to enable additional lines to be run at 90° angles to main. Roundback gasket included.

Hose to Coupler

Hose to Coupler

Female Hose Fitting designed to enable customers to fabricate rubber hose assemblies. Roundback gasket included.

Hose to Male End

Hose to Male End

Male Hose End designed to enable customers to fabricate rubber hose assemblies. Multiple ring hose ends available for high pressure. Roundback gasket included.

Independent Mainline to Lateral

Independent Mainline to Lateral

Independent Valve Tee allows valve stub to be located where needed. Complete with roundback gasket.

Lateral Coupler Tee

Lateral Coupler Tee

Handline Press in coupler offers either ¾" or 1" sprinkler outlet. Complete with roundback gasket.

Line Reducer

Line Reducer

Latch Type Line Reducer offers reduction to allow change in pipe size. Roundback gasket included.

Line Tee

Line Tee

Latch Type Line Tee offers a 90° branch off the main supply line in either direction. Roundback gaskets included.

Mainline Coupler

Mainline Coupler

Mainline Coupler, press into aluminum supply pipe. Complete with roundback gasket.

Mainline to Lateral

Mainline to Lateral

Mainline Valve Tee Set, press into aluminum pipe. Has valve stub for valve opener attachment. Used on mainline supply pipe. Complete with roundback gasket.

Plug

Plug

Latch Type End Plug designed to terminate water flow in Handline systems.

Press-On Male End

Press-On Male End

Press into aluminum pipe to form latch type male end.

Steel Repair Coupler

Steel Repair Coupler

Pipe repair coupler used to splice back together damaged aluminum pipe.

Valve Opening Elbow

Valve Opening Elbow

Clamps to valve stub to allow water flow control in one direction. Latch type. Gaskets included.

Valve Opening Tee

Valve Opening Tee

Clamps to valve stub to allow water flow in two directions. Latch type. Includes gaskets.

Weld-On Starter Coupler

Weld-On Starter Coupler

Welds to steel pipe to form a connection to Latch type fittings. Roundback gasket included.