Media Filter Technical Data

Media Filter Technical Data

Model	Flow Rate Standard		Flow Rate Metric		Filtration Area Ft2	Pad Size (inches)	Weight (lbs.)	Pressure Ratings Backwash Requirements Media Standards Applications Operation Sizes Materials Technical Data Controllers Notes: Flow rates are computed at rates not in excess of 25 GPM (17 l/s/m2) or less than 17 GPM (11.5 l/s/m2) respectively, per square foot of media bed surface. When selecting flow rates, certain variables should be considered: the quality of the source water will influence the frequency of backwash cycles. Excessively dirty water will increase backflush frequency, and in such conditions flow rates should be adjusted towards the lower flow rate.
Model	25GPM/FT2	17GPM/FT2	17L/S/M2	11.5L/S/M2	Filtration Area Ft2	Pad Size (inches)	Weight (lbs.)
215	62	42	3.9	2.6	2.5	24x48	136
218	88	60	5.6	3.8	3.5	36x48	160
224	157	107	9.9	6.7	6.3	46x60	220
324	235	160	14.8	10.1	9.5	36x90	330
230	244	167	15.4	10.5	9.8	42x72	315
330	368	250	23.2	15.8	14.7	42x108	430
236	353	240	22.3	15.1	14.1	54x96	525
336	530	360	33.4	22.7	21.2	54x144	770
245	555	377	35.0	23.8	22.2	60x114	690
345	832	566	52.5	35.7	33.3	60x160	1075
445	1110	754	70.0	47.6	44.4	60x220	1490
545	1387	943	87.5	59.5	55.5	60x280	1850
645	1665	1132	105.0	71.4	66.6	60x330	2200
248	625	425	39.4	26.8	25	66x120	720
348	937	637	59.1	40.2	37.5	66x180	1105
448	1250	850	78.9	53.6	50	66x240	1520
548	1562	1062	98.5	67.0	62.5	66x300	1880
648	1875	1275	118.3	80.4	75	66x360	2230